Dell POWERCONNECT 5548P - Iscsi Targets

602 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSwitching_iscsi.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
iSCSI Targets
To add an iSCSI target:
1
Click System > iSCSI Optimization > iSCSI Targets in the tree view to
display the
iSCSI Targets: Summary page.
Figure 20-2. iSCSI Targets: Summary
The currently-defined targets are displayed.
2 To add a new target, click Add .
3 Enter the fields:
–
TCP Port — TCP port used by the target for iSCSI communications.
–
IP Address — IP address of the target. The IP address 0.0.0.0 is any IP
address.
–
Target Name (0-223 characters) — Name of the target.