Dell POWERCONNECT 5548P - Page 295

294 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSystemConfig.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
– Source IP Address — The device IP address that is used for
communication with RADIUS servers.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed on the RADIUS pages.
Table 9-51. RADIUS Server CLI Commands
CLI Command Description
radius-server host {ipv4-
address|ipv6-address|ipv6z-
address|hostname} [auth-port
auth-port-number] [acct-port
acct-port-number][timeout
timeout] [retransmit retries]
[deadtime deadtime] [key key-
string] [source {ipv4-
address|ipv6-address}] [priority
priority] [usage
{login|802.1x|all}]
no radius-server host {ipv4-
address|ipv6-address|hostname}
Specifies a RADIUS server host.
Use the no form of the command to
delete the specified RADIUS server
host.
radius-server timeout timeout
no radius-server timeout
Sets the interval for which a device
waits for a server host to reply.
Use the no form of this command to
restore the default configuration.
radius-server source-ip source-
ip-address
no radius-server source-ip
source-ip-address
Specifies the source IPv4 address
that will be used for the IPv4
communication with RADIUS
servers.
Use the no form of this command to
restore the default configuration.