364 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSystemConfig.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
–
Destination Unit
— Check to copy the firmware to either the Backup
Master unit or all units in the stack.
3
To copy the Running Configuration file of the Master unit to the Startup
Configuration file of the Master unit or vice versa, select
Copy
Configuration Firmware
and enter the options:
–
Source
— Select either the Running Configuration or the Startup
Configuration file.
–
Destination
— Select either the Running Configuration, Startup
Configuration file or user-created flash files, depending on the source
configuration file.
or
–
New File Name (1-64 characters)
— To copy the source file to a
user-named file, enter the name of a file. If this option is selected,
check where the file is stored:
Flash
or
USB
.
4
Select
Restore Configuration Factory Defaults
to replace the current
configuration settings by the factory configuration default settings.
5
Click
Activate
to initiate the selected process.
Copying Files Using CLI Commands
The following table summarizes the CLI commands for performing actions
provided by the Copy Files page.
Table 9-67. Copy Files CLI Commands
CLI Command Description
copy source-url destination-url Copies any file from a source to a
destination.
delete startup-config Deletes the startup-config file.
delete url Deletes a file from the FLASH
memory device.
To Next Page
Loading...
