Dell PowerConnect 55xx Systems User Guide 369
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSystemConfig.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
To switch from the Backup Master unit to the Master Unit or set unit IDs:
1
Click
System
>
Stack Management
>
Stack Unit ID
in the tree view to
display the
Stack Unit ID
page.
Figure 9-62. Stack Unit ID
2
Enter the fields:
–
Switch Stack Control from Unit 1 to Unit 2
— Check this field to
make unit 2 the Master unit.
–
Unit ID After Reset
— Select
Auto
if you want the system to assign
the unit ID after reset. Select a number to assign the unit an ID
manually.
To Next Page
Loading...
