Dell POWERCONNECT 5548P - Multiple Spanning Tree

454 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSwitching_STP.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
The following is an example of the CLI commands:
show spanning-tree
[[gigabitethernet|tengigabiteth
ernet] port-number|port-channel
LAG-number]
Displays spanning tree configuration.
console(config)# interface gi1/0/5
console(config-if)# spanning-tree link-type shared
Table 13-3. Rapid STP Parameters CLI Command (Continued)
CLI Command Description