Dell POWERCONNECT 5548P - Dynamic ARP Inspection Entries

566 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSwitching_ARP.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
Creating a Dynamic ARP Inspection List Using CLI Commands
The following table summarizes the CLI commands for configuring the fields
in the
Dynamic ARP Inspection List pages.
The following is an example of some of the CLI commands:
Table 18-2. Dynamic ARP Inspection List CLI Commands
CLI Command Description
ip arp inspection list
create name
no ip arp inspection list
create name
Creates a static ARP binding list and
enters the ARP list configuration mode.
Use the no form of this command to
delete the list.
console(config)# ip arp inspection list create servers
console(config-ARP-list)#