Dell POWERCONNECT 5548P - Page 648

Dell PowerConnect 55xx Systems User Guide 647
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGStatistics.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
– GVRP Statistics — Select the GVRP statistics type to display.
–
Refresh Rate — Select the amount of time that passes before the
statistics are refreshed.
3 To draw a chart for the selected statistics, click Draw . The chart for the
selected statistic is displayed on the page.
Viewing LAG Statistics Using the CLI Commands
The following table contains the CLI commands for viewing LAG statistics.
Table 21-11. LAG Statistic CLI Commands
CLI Command Description
show interfaces counters
[[gigabitethernet|tengigabitet
hernet] interface|port-channel
LAG-number]
Displays traffic seen by the physical
interface.
show rmon statistics
{[gigabitethernet|tengigabitet
hernet] interface|port-channel
LAG-number}
Displays RMON Ethernet
statistics.
show gvrp statistics
{[gigabitethernet|tengigabitet
hernet] interface|port-channel
LAG-number}
Displays GVRP statistics.
show gvrp-error statistics
{[gigabitethernet|tengigabitet
hernet] interface|port-channel
LAG-number}
Displays GVRP error statistics.