Figure 14. Inside the C6420 sled
1 sled pull handle 2 mezzanine card
3 SATA connector 4 memory slot (4)
5 CPU1 processor heat sink module 6 CPU2 processor heat sink module socket
7 linking bar 8 M.2 SATA riser
9 memory slot (4) 10 PCIe expansion card riser assembly
PowerEdge C6420 sled
The PowerEdge C6420 sled is a server unit that is installed into the PowerEdge C6400 enclosure. The sled features dual processors,
memory, a PCIe expansion slot, mezzanine cards, and onboard storage (SD card and M.2 SATA).
Removing a sled
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
NOTE
: The process of removing a sled blank is similar to removing a sled.
Steps
Press the retaining latch and using the handle, slide the sled out of the enclosure.
34
Dell PowerEdge C6400 Installation and Service Manual
Installing and removing enclosure components
To Next Page
Loading...
