Dell PowerEdge C6400 - Installing a Hard Drive Blank; Removing Drive from Carrier

Figure 21. Removing a hard drive blank
Next steps
Install a hard drive or a hard drive blank.
Related links
Installing a hard drive blank
Installing a hard drive blank
The procedure for installing 2.5 inch and 3.5 inch hard drive blanks is identical.
Prerequisites
Follow the safety guidelines listed in Safety instructions.
CAUTION
: Mixing hard drive blanks from previous generations of PowerEdge servers is not supported.
Steps
Insert the hard drive blank into the hard drive slot, and push until the release button clicks into place.
Figure 22. Installing a hard drive blank
Next steps
1 Follow the procedure listed in After working inside your system.
Removing the hard drive from the hard drive carrier
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Dell PowerEdge C6400 Installation and Service Manual
Installing and removing enclosure components
41