Steps
1. Loosen the screw that secures the iDRAC port card holder to the system board.
2. Pull the iDRAC port card to disengage it from the iDRAC port card connector on the system board,
and remove the card from the chassis.
Figure 36. Removing and installing the iDRAC port card
1. iDRAC port 2. SD vFlash media card
3. iDRAC port card connector 4. iDRAC port card holder
5. screw
Next steps
1. Install the iDRAC port card.
2. Follow the procedure listed in After working inside your system.
Related Tasks
Removing the cooling shroud
Removing the internal cooling fan
Installing the optional iDRAC port card
Installing the internal cooling fan
Installing the cooling shroud
95
To Next Page
Loading...
