Shut down and disconnect the system........................................................................................................................36
E
xtend the system from the cabinet............................................................................................................................36
Remove the system cover...............................................................................................................................................37
Removing the air shroud..................................................................................................................................................38
Remove expansion card riser 2...................................................................................................................................... 38
Remove the network daughter card.............................................................................................................................39
Install the network daughter card................................................................................................................................. 39
Install expansion card riser 2.......................................................................................................................................... 40
Installing the air shroud.....................................................................................................................................................41
Install the system cover....................................................................................................................................................41
Slide the system into the cabinet..................................................................................................................................42
Reconnect and power on the system...........................................................................................................................42
Verify the replacement network daughter card.........................................................................................................43
Restore the HA configuration........................................................................................................................................ 44
Chapter 7: Replace a DIMM......................................................................................................... 46
Identify a failed DIMM......................................................................................................................................................46
Shut down and disconnect the system........................................................................................................................48
Extend the system from the cabinet............................................................................................................................48
Remove the system cover.............................................................................................................................................. 49
Removing the air shroud..................................................................................................................................................49
Remove the memory module..........................................................................................................................................50
Install the memory module...............................................................................................................................................51
Installing the air shroud....................................................................................................................................................52
Install the system cover...................................................................................................................................................53
Slide the system into the cabinet..................................................................................................................................53
Reconnect and power on the system.......................................................................................................................... 54
Verify the replacement DIMM........................................................................................................................................54
Restore the HA configuration........................................................................................................................................ 55
Chapter 8: Replace a PCIe HBA (SAS, FC, or NIC)....................................................................... 57
Identify the failed PCIe HBA (SAS, FC, or NIC)........................................................................................................ 57
Shut down and disconnect the system....................................................................................................................... 58
Extend the system from the cabinet............................................................................................................................59
Remove the system cover.............................................................................................................................................. 59
Remove an expansion card from an expansion card riser....................................................................................... 60
Install expansion card into expansion card riser........................................................................................................ 62
Install the system cover...................................................................................................................................................64
Slide the system into the cabinet..................................................................................................................................65
Reconnect and power on the system.......................................................................................................................... 65
Verify the PCIe HBA replacement.................................................................................................................................66
Restore the HA configuration........................................................................................................................................ 66
Chapter 9: Replace an NVRAM module........................................................................................ 68
Prepare for NVRAM replacement................................................................................................................................. 68
Single node system NVRAM data erasure............................................................................................................ 68
HA standby node NVRAM data erasure................................................................................................................ 69
Shut down and disconnect the system........................................................................................................................70
Extend the system from the cabinet............................................................................................................................ 70
Contents 3
To Next Page
Loading...
