Remove the system cover............................................................................................................................................... 71
R
emove the NVRAM module.......................................................................................................................................... 72
Install the NVRAM module.............................................................................................................................................. 73
Install the system cover................................................................................................................................................... 73
Slide the system into the cabinet.................................................................................................................................. 74
Reconnect and power on the system...........................................................................................................................75
Verify the new NVRAM module..................................................................................................................................... 75
Restore the HA configuration.........................................................................................................................................76
Chapter 10: Replace the Trusted Platform Module (TPM)............................................................ 77
Verify the status of the TPM..........................................................................................................................................77
Shut down and disconnect the system........................................................................................................................ 77
Extend the system from the cabinet............................................................................................................................ 78
Remove the system cover...............................................................................................................................................78
Locate the TPM.................................................................................................................................................................79
Upgrading the Trusted Platform Module.................................................................................................................... 80
Removing the TPM..................................................................................................................................................... 80
Installing the TPM....................................................................................................................................................... 80
Install the system cover...................................................................................................................................................80
Slide the system into the cabinet...................................................................................................................................81
Reconnect and power on the system...........................................................................................................................82
Initializing TPM for BitLocker users..............................................................................................................................82
Initializing the TPM 2.0 for TXT users......................................................................................................................... 83
Restore the HA configuration........................................................................................................................................ 83
Chapter 11: Replace the HBA330 SAS Controller..........................................................................84
Verify the status of the HBA330...................................................................................................................................84
Shut down and disconnect the system....................................................................................................................... 85
Extend the system from the cabinet............................................................................................................................85
Remove the system cover.............................................................................................................................................. 86
Remove expansion card riser 1.......................................................................................................................................87
Remove the integrated storage controller card.........................................................................................................87
Install the integrated storage controller card.............................................................................................................88
Install expansion card riser 1........................................................................................................................................... 89
Install the system cover...................................................................................................................................................90
Slide the system into the cabinet...................................................................................................................................91
Reconnect and power on the system........................................................................................................................... 91
Verify the replacement HBA330....................................................................................................................................92
Restore the HA configuration........................................................................................................................................ 92
Chapter 12: Replace a CPU.......................................................................................................... 94
Verify the status of the CPU..........................................................................................................................................94
Shut down and disconnect the system........................................................................................................................94
Extend the system from the cabinet............................................................................................................................95
Remove the system cover.............................................................................................................................................. 95
Removing the air shroud................................................................................................................................................. 96
Remove processor and heat sink module.................................................................................................................... 97
Remove the processor from the processor and heat sink module........................................................................97
Install the processor into a processor and heat sink module..................................................................................98
4 Contents
To Next Page
Loading...
