120 Configuring and Using Virtual Media
www.dell.com | support.dell.com
CD/DVD Device or Image File
-c <
device-name
> | <
image-file
>
This parameter specifies the device or file to supply the virtual CD/DVD-ROM media:
•<
image-file
> is the filename (including path) of a valid ISO-9660 image file
Example:
Windows operating system:
-c c:\temp\mydvd.img
Linux operating system:
-c /tmp/mydvd.img
•<
device-name
>
on Windows systems:
a valid CD/DVD drive letter
<
device-name
>
on Linux systems:
a valid CD/DVD device special filename
Example:
Windows operating system:
-c d:\
Linux operating system:
-c /dev/cdrom
Omit this parameter from the command line if no CD/DVD media is to be virtualized.
If an invalid value is detected, an error message is listed and the command terminates.
Version Display Switch
-v
This parameter is used to display the version of the VM-CLI utility.
If no other nonswitch options are provided, the command terminates without error.
Help Display Switch
-h
This parameter is used to display a summary of the VM-CLI utility parameters.
If no other nonswitch options are provided, the command terminates without error.
NOTE: Specify at least one media type (floppy/disk or CD/DVD) with the command, unless only switch
options are provided. Otherwise, an error message displays and the command terminates with an error.
To Next Page
Loading...
