168 racadm Subcommand Man Pages
www.dell.com | support.dell.com
Ta b le A-25 describes the racreset subcommand options.
Examples
• racadcm racreset soft 1
Start the DRAC 4 soft reset sequence in 1 second.
• racadm racreset soft 20
Start the DRAC 4 soft reset sequence after 20 seconds.
racresetcfg
NOTE: To use this command, you must have Configure DRAC 4 permission.
Ta b le A-26 describes the racresetcfg subcommand.
Synopsis
racadm racresetcfg
Table A-25. racreset Subcommand Options
Option Description
hard A hard reset resets the entire DRAC 4 and is as close to a power-on reset as can be achieved
using software. The DRAC 4 log, database, and selected daemons are shut down gracefully
prior to the reset. A hard reset should be considered as a final effort. PCI configuration is lost.
soft A soft reset is a processor and processor subsystem reset that resets the processor core to
restart the software. PCI configurations are preserved. The DRAC 4 log, database, and
selected daemons are shut down gracefully prior to the reset.
graceful A graceful reset is the same as a soft reset.
<delay> The user is allowed to select how many seconds of delay occur before the reset sequence is
started. A valid delay entry is between 1-60 seconds. The default is 3 seconds.
Table A-26. racresetcfg
Subcommand Definition
racresetcfg Resets all database configuration parameters to default
values; equivalent to a soft reset.
To Next Page
Loading...