Dell Remote Access Controller 4 Firmware Version 1.30 - getsysinfo

160 racadm Subcommand Man Pages
www.dell.com | support.dell.com
Examples
• racadm getssninfo
Session table summary status:
1 VALID
3 AVAILABLE
Ta b le A-13 provides an example of output from the racadm getssninfo command.
• racadm getssninfo -A
1 3
"Web" "RAC\root" 143.166.174.19 "Thu, 06 Mar 2004 10:32:39 GMT-
06:00" "NONE"
• racadm getssninfo -A -u *
"Web" "RAC\root" 143.166.174.19 "Thu, 06 Mar 2004 10:32:39 GMT-
06:00" "NONE"
getsysinfo
NOTE: To use this command, you must have Log In To DRAC 4 permission.
Ta b le A-14 describes the getsysinfo subcommand.
Synopsis
racadm getsysinfo [-d] [-s] [-w] [-A][-r]
Table A-13. getssninfo Subcommand Output Example
Type User IP Address Login Date/Time Consoles
Web DRAC 4 root
143.166.174.19
Thu, 06 Mar
2004 10:32:39
GMT-06:00
NONE
Table A-14. getsysinfo
Command Definition
getsysinfo Displays DRAC 4 information, system
information, and watchdog status information.