Dell Remote Access Controller 4 Firmware Version 1.30 - Email Alert Severity; Table

60 Managing and Recovering a Remote System
www.dell.com | support.dell.com
Printing the Page
Click the Print button in the top-right corner of the page if you want to print the
Add/Configure DRAC 4 User page.
Table 4-4. email Alert Severity
Severity Description
Informational Select the check boxes in this column to cause the DRAC 4 to send an
alert if the corresponding event listed under Alert Description occurs
with a severity of Informational.
Warning Select the check boxes in this column to cause the DRAC 4 to send an
alert if the corresponding event listed under Alert Description occurs
with a severity of Warning.
Severe Select the check boxes in this column to cause the DRAC 4 to send an
alert if the corresponding event listed under Alert Description occurs
with a severity of Severe.
Alert Description Lists the following events monitored by the DRAC 4. A specified alert
(either Informational, Warning, or Severe) is sent when the event is
triggered at the level of severity you selected in the check boxes to the left.
• Select All — Monitors all of the sensors available on the system.
•
System Temperature Sensors — Monitors the system temperature sensors.
•
System Voltage Sensors — Monitors the system voltage sensors.
•
System Fan Sensors — Monitors the system fan speed in rpm.
•
System Miscellaneous Sensors — Monitors other available system
sensors such as chassis intrusion.
Apply Changes Adds a new DRAC 4 user or commits changes made to the current
DRAC 4 user.
Go Back To User Configuration
Page
Opens the DRAC 4 Users page.