Dell Remote Access Controller 4 Firmware Version 1.30 - Cfgserialsshenable (Read;Write); Cfgserialtelnetenable (Read;Write); Cfgserialcom2 Redirenable (Read;Write)

DRAC 4 Property Database Group and Object Definitions 203
cfgSerialSshEnable (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Legal Values
0=disabled, 1=enabled
Default
1=enabled
Description
Enables/disables secure shell on the DRAC 4.
cfgSerialTelnetEnable (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Description
Enables/disables telnet console
Default
0=telnet disabled
Legal Values
0=disabled, 1=enabled
cfgSerialCom2RedirEnable (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Description
Enables/disables the console through the COM 2 port
Default
1=COM 2 (console enabled)
Legal Values
0=Disabled, 1=Enabled