Dell Remote Access Controller 4 Firmware Version 1.30 - Sslcertview; Synopsis; Options; Output Examples

178 racadm Subcommand Man Pages
www.dell.com | support.dell.com
sslcertview
NOTE: To use this command, you must have Configure DRAC 4 permission.
Ta b le A-40 describes the sslcertview subcommand.
Synopsis
racadm sslcertview -t < type > [-A]
Options
Ta b le A-41 describes the sslcertview subcommand options.
Output Examples
For the racadm sslcertview -t 1 subcommand, you receive output similar to the following
example, where C is the country, CN is the common name, O is the organization, OU is the
organizational unit, L is the locality, S is the state, and E is the email address:
certificate type=1
serial number=00
key size=1024
valid from=DSU+12:34:31
valid to=DSU+15:34:31
subject.C=US
subject.CN=RMC Default Certificate
subject.O=Dell Inc.
subject.OU=BVS
subject.L=Round Rock
subject.S=Texas
subject.E=john@dell.com
Table A-40. sslcertview
Subcommand Description
sslcertview Displays a CA certificate or server certificate
that is located in the DRAC 4.
Table A-41. sslcertview Subcommand Options
Option Description
-t Specifies the type of certificate to upload, either the CA certificate or server certificate.
0x1 = server certificate
0x2 = Active Directory certificate
-A Prevents printing headers/labels.