Dell Remote Access Controller 4 Firmware Version 1.30 - Description; Options; Output; Testtrap

180 racadm Subcommand Man Pages
www.dell.com | support.dell.com
Description
The testemail subcommand forces the DRAC 4 to send an email over the DRAC 4
network
adapter.
Options
Ta b le A-43 describes the testemail subcommand options.
Output
None.
testtrap
NOTE: To use this command, you must have Test Alerts permission.
Ta b le A-44 describes the testtrap subcommand.
Synopsis
racadm testtrap -i < index >
Description
The testtrap subcommand forces the DRAC 4 to send an SNMP trap over the DRAC 4 NIC.
Input
Ta b le A-45 describes the testtrap subcommand options.
Table A-43. testemail Subcommand Options
Option Description
-u Specifies the user who receives the email. The necessary properties must be
set up to correctly send email messages.
-i Specifies the index of the user.
Table A-44. testtrap
Subcommand Description
testtrap Tests an SNMP trap.
Table A-45. testtrap Subcommand Options
Option Description
-i Specifies the index of the trap.