Dell Remote Access Controller 4 Firmware Version 1.30 - cfgRacTuning

210 DRAC 4 Property Database Group and Object Definitions
www.dell.com | support.dell.com
Description
0=Disable, 1=Enable transmission of SNMP traps.
cfgOobSnmpAgentEnable (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission. This object requires a
DRAC
4 reset before it becomes active.
Legal Values
Boolean either 1 or 0 (TRUE or FALSE).
Default
0
Description
0=Disable, 1=Enable the DRAC 4 SNMP agent.
cfgRacTuning
The group contains various tuning configuration parameters.
One instance of the group is allowed. The following subsections describe the objects in this group.
cfgRacTuneHttpPort (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 4 permission.
Legal Values
0 – 65535
Default
80
Description
Use this property to configure the DRAC 4 HTTP port. (Type hexadecimal values.)