Dell S2830dn User Manual

Installing an optional card
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer o, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic components
or connectors.
1 Access the controller board.
For more information, see
“Accessing the controller board” on page 13.
2 Unpack the optional card.
Warning—Potential Damage: Avoid touching the connection points along the edge of the card.
Additional printer setup 14

Dell S2830dn Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Yes
Memory	512 MB
Processor Speed	800 MHz
Printer Type	Monochrome Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Standard Connectivity	USB 2.0
Maximum Paper Size	A4
Paper Input Capacity	250-sheet standard input tray, 50-sheet multipurpose tray