Use To
Print Area
Normal
Whole Page
Set the logical and physical printable area.
Notes:
• Normal is the factory default setting. When attempting to
print data on the non‑printable area defined by the
Normal setting, the printer clips the image at the
boundary.
• Whole Page allows the image to be moved into the
non‑printable area
defined
by the Normal setting. This
setting aects only pages printed using a PCL 5
interpreter and has no eect on pages printed using the
PCL XL or PostScript interpreter.
Download Target
RAM
Flash
Set the storage location for downloads.
Notes:
• RAM is the factory default setting. Storing downloads in
the RAM is temporary.
• Storing downloads in a
flash
memory places them in
permanent storage. Downloads remain in the flash
memory even when the printer is turned
o.
• This menu item appears only when an optional flash
memory is installed.
Resource Save
On
O
Specify how the printer handles temporary downloads, such
as fonts and macros stored in the RAM, when the printer
receives a print job that requires more than the available
memory.
Notes:
• O is the factory default setting. O sets the printer to
retain downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
• On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full [38] appears on the
printer display, but downloads are not deleted.
Understanding the printer menus 71
To Next Page
Loading...
Need help?
General
