Figure 114. Configure Local Ports
a. Configure the Purpose, Fault Domain, and User Alias for all transport types (FC, iSCSI, SAS).
b. Click Assign Now. The Startup Wizard informs you that the port configuration has been
generated.
7. Click Continue. The Generate SSL Cert page opens.
Related links
Configure Local Ports
Configure Local Ports
Configure the front-end ports and back-end ports on an SC4020.
The following table shows the port purposes for transport types in Virtual Port Mode.
Table 17. Port Purposes in Virtual Port Mode
Port Purpose Description
Unknown One of the following:
• Port purpose is not yet defined.
• The port is unused.
Front End Port is connected to servers and is used for the server I/O path or the port is
connected to another Storage Center and used for replication.
Back End Port is connected to an expansion enclosure.
The following table shows the port purposes for transport types in Legacy Mode.
Table 18. Port Purposes in Legacy Mode
Port Purpose Description
Unknown One of the following:
• Port purpose is not yet defined.
128
Set up Storage Center Software
To Next Page
Loading...
