About this task
The following image(s) indicate the location of the left-side cover and provides a visual representation of the installation
procedure.
Steps
1. Holding the left-side cover firmly on both sides, slide it into the chassis towards the front of the computer.
2. Replace the two screws (#6-32) that secure the left-side cover to the chassis.
Next steps
1. Follow the procedure in After working inside your computer.
Front cover
Removing the front cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following image(s) indicate the location of the front cover and provides a visual representation of the removal procedure.
14
Removing and installing components
To Next Page
Loading...
