Steps
1. Align and insert the front-cover tabs into the slots on right side of the chassis.
2. Rotate the front cover towards the chassis and snap the tabs into place.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
Hard drive
Removing the 3.5-inch hard drive
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the front cover.
About this task
The following image(s) indicate the location of the 3.5-inch hard drive and provides a visual representation of the removal
procedure.
16
Removing and installing components
To Next Page
Loading...
