Removing the memory modules
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the base cover.
2 Remove the battery (half-length) or the battery (full-length).
Procedure
1 Using your ngertips, spread the securing clips apart on each end of the memory-module slot until the memory module pops up.
2 Slide and remove the memory module from the memory-module slot.
9
Removing the memory modules 19
To Next Page
Loading...
