Removing the antenna cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the base cover.
2 Remove the battery (half-length) or the battery (full-length).
3 Remove the wireless card.
4 Remove the display assembly.
Procedure
1 Carefully turn the display hinges at an angle.
Figure 33. Turning the display hinge
1
display assembly 2 display hinges (2)
2 Slide and lift the antenna cover o the antenna module.
41
Removing the antenna cover 73