Removing the audio daughter-board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the base cover.
2 Remove the battery (half-length) or the battery (full-length).
3 Remove the wireless card.
4 Follow the procedure from step 1 to step 4 in “Removing the hard drive”.
5 Remove the solid-state drive (half-length) or the solid-state drive (full-length).
6 Remove the fans.
7 Remove the heat sink.
8 Remove the memory modules.
9 Remove the system-board assembly.
Procedure
1 Remove the two screws (M2x3) that secure the audio daughter-board to the system-board assembly.
2 Lift the audio daughter-board o the system board.
27
Removing the audio daughter-board 51
To Next Page
Loading...
