Replacing the speakers
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Using the alignment posts, place the speakers on the palm-rest assembly.
2 Replace the four screws (M2x2) that secure the speakers to the palm-rest assembly.
3 Route the speaker cables through the routing guides on the palm-rest assembly.
4 Connect the speaker cable to the audio daughter-board.
Post-requisites
1 Replace the battery (half-length) or the battery (full-length).
2 Replace the base cover.
18
Replacing the speakers 35
To Next Page
Loading...
