Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the base cover.
2 Remove the battery (half-length) or the battery (full-length).
Procedure
1 Loosen the captive screw that secures the wireless-card bracket to the wireless card.
2 Lift the wireless-card bracket o the wireless card.
3 Disconnect the antenna cables from the wireless card.
4 Slide and remove the wireless card out of the wireless-card slot.
Figure 16. Removing the wireless card
1
captive screw 2 wireless-card bracket
19
36 Removing the wireless card
To Next Page
Loading...
