Removing the speakers
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the base cover.
2 Remove the battery (half-length) or the battery (full-length).
Procedure
1 Disconnect the speaker cable from the audio daughter-board.
2 Note the speaker-cable routing and remove the cable from the routing guides.
3 Remove the four screws (M2x2) that secure the speakers to the palm-rest assembly.
4 Lift the speakers, along with the speaker cable, o the palm-rest assembly.
17
Removing the speakers 33