Replacing the palm-rest assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
Place the palm-rest assembly on a clean and at surface.
Post-requisites
1 Replace the power-adapter port.
2 Replace the display assembly.
3 Replace the ngerprint reader daughter-board.
4 Replace the keyboard.
5 Replace the system-board assembly.
6 Replace the heat sink.
7 Replace the fans.
8 Replace the wireless card.
9 Replace the speakers.
10 Replace the solid-state drive (half-length) or the solid-state drive (full-length).
11 Follow the procedure from step 3 to step 6 in “Replacing the hard drive”.
12 Replace the memory modules.
13 Replace the battery (half-length) or the battery (full-length).
14 Replace the base cover.
46
Replacing the palm-rest assembly 81
To Next Page
Loading...
