Replacing the antenna cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the antenna cover on the antenna module with the at surface of the cover facing away from the display assembly.
2 Replace the antenna cover and slide it to snap into place.
3 Turn the display hinges to the normal position.
Post-requisites
1 Replace the display assembly.
2 Replace the wireless card.
3 Replace the battery (half-length) or the battery (full-length).
4 Replace the base cover.
42
Replacing the antenna cover 75