NOTE: All new keyboards will be shipped with the Mylar. Do not peel o the
Mylar.
Figure 27. Disconnecting the keyboard and keyboard-backlight cable
1
Mylar 2 keyboard cable
3 latches (2) 4 keyboard-backlight cable
5 Remove the 31 screws (M1.6x1.5) that secure the keyboard to the palm-rest assembly.
6 Lift the keyboard o the palm-rest assembly.
Figure 28. Removing the screws from the keyboard
1
screws (31) 2 keyboard
3 palm-rest assembly
58 Removing the keyboard
To Next Page
Loading...
