Chapter 10 Troubleshooting|ASDA-AB Series
Revision January 2009 10-9
Display Fault Name Clearing Method
Command write-in error
Turn ARST (DI signal) ON to clear the fault or
restart the servo drive.
Input power phase loss
Turn ARST (DI signal) ON to clear the fault. This
fault message can be removed automatically after
input power phase lost problem is solved.
Pre-overload warning
Turn ARST (DI signal) ON to clear the fault or
restart the servo drive.
Internal command execution
time out
Turn ARST (DI signal) ON to clear the fault or
restart the servo drive.
DSP communication error
Turn ARST (DI signal) ON to clear the fault or
restart the servo drive.
DSP communication error
Turn ARST (DI signal) ON to clear the fault or
restart the servo drive.
To Next Page
Loading...
