What to do if Delta Servo Drives show Encoder temperature exceeds the protective range?
If your Delta Servo Drives are showing that the encoder temperature exceeds the protective range, above 105?, improve heat dissipation or reduce the loading of operation.
What to do if Delta ASD-A2-5523 Servo Drives show Communication of linear scale is breakdown?
If your Delta Servo Drives are showing that the communication of linear scale is breakdown, check the communication of linear scale again.
What to do if Delta Servo Drives show Analog input voltage error?
If your Delta Servo Drives are showing an analog input voltage error because the analog input voltage is higher than the value of P1-83, check all analog input voltages.
What to do if Delta Servo Drives show Warning of servo drive function overload?
If your Delta Servo Drives are showing a warning of servo drive function overload, set P2-66 Bit4 to 1 and then re-power on the servo drive.
What to do if Delta ASD-A2-5523 Servo Drives show Wrong setting of E-gear ratio?
If your Delta Servo Drives are showing the wrong setting of E-gear ratio because setting of E-gear ratio is wrong when power on the servo drive, modify the range of E-gear ratio and repower on the servo drive.
What to do if Delta ASD-A2-5523 show The absolute position is lost?
If your Delta Servo Drives are showing that the absolute position is lost because of battery undervoltage, after change the battery, conduct homing procedure again.
What to do if Delta ASD-A2-5523 show The multi-turn of absolute encoder overflows?
If your Delta Servo Drives are showing that the multi-turn of absolute encoder overflows because the operation distance exceeds the range the absolute encoder is able to record, conduct homing procedure again.
What to do if Delta ASD-A2-5523 Servo Drives show Encoder temperature warning?
If your Delta Servo Drives are showing an encoder temperature warning because encoder temperature exceeds the warning level (but it is still within the protective range85 ~100?), improve heat dissipation or reduce the loading of operation.
How to fix absolute data transmitted via I/O is in error in Delta ASD-A2-5523?
If your Delta Servo Drives are showing that absolute data transmitted via I/O is in error because of sequence error, correct the reading sequence of I/O.
What to do if Delta Servo Drives show Wrong motor type?
If your Delta Servo Drives are showing the wrong motor type because incremental motor is not allowed to activate the absolute function, if the user desires to use absolute function, please choose absolute motor.
General| Series | ASD-A2 |
|---|---|
| Model | ASD-A2-5523 |
| Category | Servo Drives |
| Rated Output Power | 5.5 kW |
| Applicable Motor Capacity | 5.5 kW |
| Rated Power | 5.5 kW |
| Rated Current | 23 A |
| Main Circuit Control Method | PWM control |
| Control Mode | Position, Speed, Torque |
| Communication Interface | RS-485, CANopen |
| Feedback | Incremental encoder, Absolute encoder |
| Power Supply | 3-phase 200 to 230 VAC |
| Input Voltage | 3-phase 200 to 230 VAC |
| Speed Command Source | Analog voltage |
| Torque Command Source | Analog voltage |
| Protection Features | Overcurrent, Overvoltage, Overload |
Check the product for damage, loose screws, and ensure correct wiring before use.
Details on naming conventions for ASDA-A2 series servo drives and ECMA series servo motors.
Specifications and model compatibility between ASDA-A2 servo drives and ECMA series servo motors.
Guidelines for installing and operating the servo drive and servo motor in suitable environments.
Recommended circuit breakers and fuses for 220V and 400V series servo drives, recognized by UL/CSA.
Information on wiring ASDA-A2 series products for 220V systems.
Information on wiring ASDA-A2 series products for 400V systems.
Details on the CN1 connector for I/O signals, including programmable digital outputs and inputs.
Details on the CN2 connector for motor encoder connection, including quick and military connectors.
Example wiring diagrams for 220V series servo drives in various control modes.
Example wiring diagrams for 400V series servo drives in various control modes.
Step-by-step guide on switching modes and operating within Monitor, Parameter, and Alarm modes.
Procedure for inspecting the servo motor and drive without load, checking for damage and correct wiring.
Instructions for correctly wiring the motor to the servo drive and applying power.
Steps for tuning the servo drive, including inertia ratio estimation, auto tuning, and manual tuning.
Description of available operation modes: Position, Speed, Torque, Dual, and Multi modes.
Overview of motion control functions including Single-axis motion controller, Capture/Compare, and E-Cam.
Overview of PR parameters related to target speed, accel/decel time, pause time, and PR definition.
Definition of parameter groups (0-7) and control mode descriptions (PT, PR, S, T, DMC).
Comprehensive list of Monitor and General Output parameters with their functions, defaults, and control modes.
Details on RS-485 and RS-232 communication, including wiring descriptions and configuration.
List of servo drive alarms, their descriptions, corresponding DO, and servo status.
Troubleshooting for CANopen communication alarms, including causes and corrective actions.
Detailed causes and corrective actions for common servo drive alarms such as over current, over voltage, and encoder errors.
Step-by-step corrective actions for various alarms like Over current, Over voltage, and Encoder errors.
Detailed specifications for ASDA-A2 series servo drives, including 220V and 400V series.
Specifications for ECMA series servo motors, including 220V and 400V series, and medium/high inertia models.
Safety precautions and specifications for backup battery boxes, including single and dual types.
Procedure for system initialization, including coordinate acquisition and parameter settings.
List of alarms related to absolute systems, including encoder errors and communication issues.
Troubleshooting guide for absolute system alarms, detailing causes and corrective actions.
To Next Page
