Delta ASDA-M Series User Manual

ASDA-M Chapter 5 Trial Operation and Tuning
Revision December, 2014 5-5
6) When the screen displays
Warning of overcurrent:
Corrective action:
 Check the connection between the motor and servo drive.
 Check if the conducting wire is short circuited.
Exclude short circuit and avoid metal conductors being exposed.
7) When the screen displays
Warning of under voltage:
Corrective action:
 Check if the wiring of main circuit input voltage is correct.
 Use voltmeter to measure if the main circuit voltage is normal.
 Use voltmeter to measure if the power system complies with the specification.
Note: During the process of power on or servo on, if an alarm occurs or shows any
abnormal display, please contact the distributors.

Delta ASDA-M Series Specifications

General

Brand	Delta
Model	ASDA-M Series
Category	Servo Drives
Language	English