Delta ASDA-M Series User Manual

Preface ASDA-M
iv
Revision December, 2014

Do not turn the power on and off too often. If continuous power on and off is
needed, please be ensured the interval is one minute at most.
Terminal Wiring of the Main Circuit

When wiring, please disassemble the terminal socket from the servo drive.

One terminal of the terminal socket for one electric wire only.

When inserting the electric wires, do not connect the conductor to the adjacent
wire.

Before connecting to the power, please inspect and be ensured the wiring is
correct.
NOTE
If there is any difference of each version, please refer to DELTA’s
website (http://www.delta.com.tw/industrialautomation/) for the latest
information.
www.e-comtech.it
info@e-comtech.it
Via Polesine, 1/4
10020 Cambiano ( TO ) Italy
+39 011 9454523

Delta ASDA-M Series Specifications

General

Brand	Delta
Model	ASDA-M Series
Category	Servo Drives
Language	English