Delta DVP-PLC User Manual

6 Application Instructions API 00-49
DVP-PLC Application Manual
6-11
M1056
Disable time interruption I6□□
M1057
Disable time interruption I7□□
M1059 Disable high-speed counter interruption I010 ~ I060
6. “Disable interruption” flags in EH/EH2/SV:
Flag Function
M1280
Disable external interruption I00
□
M1281
Disable external interruption I10
□
M1282
Disable external interruption I20
□
M1283
Disable external interruption I30
□
M1284
Disable external interruption I40
□
M1285
Disable external interruption I50
□
M1286
Disable time interruption I6□□
M1287
Disable time interruption I7□□
M1288
Disable time interruption I8□□
M1289 Disable high-speed counter interruption I010
M1290 Disable high-speed counter interruption I020
M1291 Disable high-speed counter interruption I030
M1292 Disable high-speed counter interruption I040
M1293 Disable high-speed counter interruption I050
M1294 Disable high-speed counter interruption I060
M1295 Disable pulse output interruption I110
M1296 Disable pulse output interruption I120
M1297 Disable pulse output interruption I130
M1298 Disable pulse output interruption I140
M1299 Disable communication interruption I150
M1300 Disable communication interruption I160
M1301 Disable communication interruption I170
M1302 Disable frequency measurement card interruption I180
M1340 Generate interruption I110 after CH0 pulse is sent
M1341 Generate interruption I120 after CH1 pulse is sent
M1342 Generate interruption I130 when CH0 pulse is being sent
M1343 Generate interruption I140 when CH1 pulse is being sent

Delta DVP-PLC Specifications

General

Manufacturer	Delta Electronics
Model	DVP-PLC
Category	Controller
Humidity	5% to 95% RH, non-condensing
Programming Language	Ladder Diagram (LD), Instruction List (IL), Sequential Function Chart (SFC)
CPU Type	Various, depending on the specific model within the DVP series (e.g., ES2, EX2, SX2, SA2, EH3, etc.)
Operating Temperature	Typically 0°C to 55°C (32°F to 131°F)
Storage Temperature	Typically -25°C to 70°C (-13°F to 158°F)