Delta DVP-PLC User Manual

6 Application Instructions API 00-49
DVP-PLC Application Manual
6-22
Program Example 2:
When M1168 = On (in BIN mode) and SMOV instruction is in use, D10 and D20 will not be converted in BCD format
but be moved in BIN format (4 digits as a unit).
Unchanged
U nchanged
D10(BIN 16 bits)
D20(BIN 16 bits)
Moving digits
M100
0
X0
Digit 4
Digit 3 Digit 2 Digit 1
Digit 4
Digit 3 Digit 2
Digit 1
M1168
SMOV D10 K2 D20 K3K4
Before the execution, assume D10 = H1234 and D20 = H5678. After the execution, D10 will remain unchanged and
D20 will become H5128.
Program Example 3:
1. This instruction can be used to combine the DIP switches connected to the input terminals with interrupted No.
2. Move the 2
nd
right digit of the DIP switch to the 2
nd
right digit of D2, and the 1
st
left digit of the DIP switch to the
1
st
right digit of D1.
3. Use SMOV instruction to move the 1
st
digit of D1 to the 3
rd
digit of D2 and combine the two DIP switches into
one.
10
1
10
0
10
2
6 4 2
PLC
X13~X10
X27~X20
8
8
8
M1000
BIN
K2X20
D2
D1
SMOV
D1
K1
D2
K3
K1
K1X10
(X20~X27)BCD
(X10~X13)BCD
2 digits
D2(BIN)
1 digit
D1(BIN)
M1001
M1168
BIN

Delta DVP-PLC Specifications

General

Manufacturer	Delta Electronics
Model	DVP-PLC
Category	Controller
Humidity	5% to 95% RH, non-condensing
Programming Language	Ladder Diagram (LD), Instruction List (IL), Sequential Function Chart (SFC)
CPU Type	Various, depending on the specific model within the DVP series (e.g., ES2, EX2, SX2, SA2, EH3, etc.)
Operating Temperature	Typically 0°C to 55°C (32°F to 131°F)
Storage Temperature	Typically -25°C to 70°C (-13°F to 158°F)