Name: Delta DVP-PLC
Brand: Delta
Rating: 5 (1 reviews)

To Next Page

To Previous Page

6 Application Instructions API 00-49

DVP-PLC Application Manual

6-68

4. When backward switch X1 = On and backward device Y1 = On, Y1 will go Off only when the device reaches the

back position switch X3.

5. Y2 will be On when any annunciator is enabled. Whenever X4 is on, 1 annunciator in action will be reset. The

reset starts from the annunciator with the smallest No.

Questions and Answers:

Need help?

Do you have a question about the Delta DVP-PLC and is the answer not in the manual?

Delta DVP-PLC Specifications

General

Manufacturer	Delta Electronics
Model	DVP-PLC
Category	Controller
Humidity	5% to 95% RH, non-condensing
Programming Language	Ladder Diagram (LD), Instruction List (IL), Sequential Function Chart (SFC)
CPU Type	Various, depending on the specific model within the DVP series (e.g., ES2, EX2, SX2, SA2, EH3, etc.)
Operating Temperature	Typically 0°C to 55°C (32°F to 131°F)
Storage Temperature	Typically -25°C to 70°C (-13°F to 158°F)