Delta DVP-PLC User Manual

6 Application Instructions API 00-49
DVP-PLC Application Manual
6-72
M1000
FLT D10 D100
BIN K2X0 D200
FLT D200 D202
DEDIV
K615 K10
DEDIV D100 D202
DEMUL D400 D300
DEBCD D20 D30
DINT D20 D40
D300
D400
D20
1
2
3
4
5
6
7
8
○
1
D10 (BIN integer) is converted to D101 and D102 (binary floating point value).
○
2
X7 ~ X0 (BCD value) are converted to D200 (BIN value).
○
3
D200 (BIN integer) is converted to D203 and D202 (binary floating point value).
4The result of K615 ÷ K10 is stored in D301 and D300 (binary floating point value).
○
5
The result of binary decimal division (D101, D100) ÷ (D203, D202) is stored in D401 and D400 (binary floating
point value).
○
6
The result of binary decimal multiplication (D401, D400) × (D301, D300) is stored in D21 and D20 (binary
floating point value).
○
7
D21 and D20 (binary floating point value) are converted to D31 and D30 (decimal floating point value).
○
8
D21 and D20 (binary floating point value) are converted to D41 and D40 (BIN integer).

Delta DVP-PLC Specifications

General

Manufacturer	Delta Electronics
Model	DVP-PLC
Category	Controller
Humidity	5% to 95% RH, non-condensing
Programming Language	Ladder Diagram (LD), Instruction List (IL), Sequential Function Chart (SFC)
CPU Type	Various, depending on the specific model within the DVP series (e.g., ES2, EX2, SX2, SA2, EH3, etc.)
Operating Temperature	Typically 0°C to 55°C (32°F to 131°F)
Storage Temperature	Typically -25°C to 70°C (-13°F to 158°F)