Delta DVP-PLC User Manual

8 Application Instructions API 100-149
DVP-PLC Application Manual
8-13
Registers for received data (responding messages)
Register DATA Explanation
D1070 low ‘C’ 43 H Start word of instruction
D1071 low ‘♥’ 03 H Checksum
D1072 low ‘♠’ 06 H Reply authorization (correct: 06H, incorrect: 07 H)
D1073 low ‘0’ 30 H
D1074 low ‘0’ 30 H
D1075 low ‘0’ 30 H
D1076 low ‘1’ 31 H
Communication address
D1077 low ‘0’ 30 H
D1078 low ‘5’ 35 H
D1079 low ‘0’ 30 H
D1080 low ‘0’ 30 H
Running instruction
Remarks:
There is no limitation on the times of using this instruction in the program, but only one instruction is allowed to be
executed at a time.

Delta DVP-PLC Specifications

General

Manufacturer	Delta Electronics
Model	DVP-PLC
Category	Controller
Humidity	5% to 95% RH, non-condensing
Programming Language	Ladder Diagram (LD), Instruction List (IL), Sequential Function Chart (SFC)
CPU Type	Various, depending on the specific model within the DVP series (e.g., ES2, EX2, SX2, SA2, EH3, etc.)
Operating Temperature	Typically 0°C to 55°C (32°F to 131°F)
Storage Temperature	Typically -25°C to 70°C (-13°F to 158°F)