Delta DVP-PLC User Manual

8 Application Instructions API 100-149
DVP-PLC Application Manual
8-44
D10FLT
M1000
D14
K31415926 K1800000000
D20D14 D40
K30
MOVP
X0
D10
K60
X1
D10
D50D40
DEDIV
DSIN
D20
MOVP
DEMUL
(K30 D10)
(K60 D10)
(D10 D15, D14)
( /180) (D21, D20)
(D15, D14) angle x /180
(D41, D40) RAD binary floating point
(D41 D40) RAD (D51, D50) SIN,
binary
floating point
binary floating point
binary
floating point
binary floating point
Program Example 3:
When M1018 = On, the program is in angle mode. When X0 = On, use the angle of (D1, D0) to obtain SIN value and
store the binary floating point result in (D11, D10). (0° ≤ angle < 360°)
M1002
SET M1018
X0
DSIN
D0 D10
D 1 D 0
D 11 D 10
angle value
SIN value
(binary floating point)
Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

Delta DVP-PLC Specifications

General

Manufacturer	Delta Electronics
Model	DVP-PLC
Category	Controller
Humidity	5% to 95% RH, non-condensing
Programming Language	Ladder Diagram (LD), Instruction List (IL), Sequential Function Chart (SFC)
CPU Type	Various, depending on the specific model within the DVP series (e.g., ES2, EX2, SX2, SA2, EH3, etc.)
Operating Temperature	Typically 0°C to 55°C (32°F to 131°F)
Storage Temperature	Typically -25°C to 70°C (-13°F to 158°F)