Delta DVP-PLC User Manual

9 Application Instructions API 150-199
DVP-PLC Application Manual
9-29
D1336：
For EH/EH2/SV, low word of the current number of output pulses from CH0.
D1337：
For EH/EH2/SV, high word of the current number of output pulses from CH0.
D1338：
For EH/EH2/SV, low word of the current number of output pulses from CH1.
D1339：
For EH/EH2/SV, high word of the current number of output pulses from CH1.
D1340：
For EH/EH2/SV, settings of the first start frequency and the last end frequency of CH0.
D1343：
For EH/EH2/SV, settings of acceleration/deceleration time for CH0 pulse output.
D1352：
For EH/EH2/SV, settings of the first start frequency and the last end frequency of CH1.
D1353：
For EH/EH2/SV, settings of acceleration/deceleration time for CH1 pulse output.
D1375：
For EH2/SV, low word of the current number of output pulses from CH2.
D1376：
For EH2/SV, high word of the current number of output pulses from CH2.
D1377：
For EH2/SV, low word of the current number of output pulses from CH3.
D1378：
For EH2/SV, high word of the current number of output pulses from CH3.
D1379：
For EH2/SV, settings of the first start frequency and the last end frequency of CH2.
D1380：
For EH2/SV, settings of the first start frequency and the last end frequency of CH3.
D1348： For EH2/SV, deceleration time for CH0 pulse output when M1534 = On.
D1349： For EH2/SV, deceleration time for CH1 pulse output when M1535 = On.
D1350： For EH2/SV, deceleration time for CH2 pulse output when M1536 = On.
D1351： For EH2/SV, deceleration time for CH3 pulse output when M1537 = On.
D1381： For EH2/SV, settings of acceleration/deceleration time for CH2 pulse output.
D1382： For EH2/SV, settings of acceleration/deceleration time for CH3 pulse output.
D1383： For EH2/SV, the time difference between the direction signal and pulse output sent by CH2.
D1384： For EH2/SV, the time difference between the direction signal and pulse output sent by CH3.

Delta DVP-PLC Specifications

General

Manufacturer	Delta Electronics
Model	DVP-PLC
Category	Controller
Humidity	5% to 95% RH, non-condensing
Programming Language	Ladder Diagram (LD), Instruction List (IL), Sequential Function Chart (SFC)
CPU Type	Various, depending on the specific model within the DVP series (e.g., ES2, EX2, SX2, SA2, EH3, etc.)
Operating Temperature	Typically 0°C to 55°C (32°F to 131°F)
Storage Temperature	Typically -25°C to 70°C (-13°F to 158°F)