Delta DVP-PM Series User Manual

12 POU Editing Mode
DVP-PM Application Manual
12-14
 Import Symbols
The exported symbols can be imported by selecting the file with an extension name “*.cvs”. After the symbol file is
imported, the symbols in the file will be displayed in the symbol table.
1. Move the cursor to the symbol table and right click to select Import Symbols from the pop-up list.
.
Step 1: move the cursor to the symbol table Step 2: Right click to select “Import Symbols” from
the pop-up list.
2. Select the file to be imported and set up the preference setting for importing symbols.
z Symbols File: select the file to be imported.
z Clear Table before Importing: The symbols in current symbol table will be cleared if “Yes” is selected and
be held if “No” is selected.
z Conflict Option: When “Replace All” is selected, the repeated symbols will be replaced during the import

Delta DVP-PM Series Specifications

General

Brand	Delta
Model	DVP-PM Series
Category	Controller
Language	English