Delta DVP-PM Series User Manual

12 POU Editing Mode
DVP-PM Application Manual
12-36
5. In the table below, address values of test3 and test4 are cleared.
12.1.8 Ladder Find
There are 2 types of
Find function in PMSoft including “Ladder Find” and “IL Find.” Ladder Find function is similar to
general IL find function which is explained in “IL Find” in chapter 4. To find instructions, devices or symbols in POU
ladders or Symbol Tables, Ladder Find function is required.
1. Find / Replace – Ladder
Right click at current POU ladder diagram and select F
ind from the drop-down list. You can find instructions,
devices or symbols by this function. Matched results, if any, will be indicated. You can click “More” at the bottom
right corner of Find window for more search options as below.
Available options for searching:
z Current Network: The searching starts from the current network section you are editing.

Delta DVP-PM Series Specifications

General

Brand	Delta
Model	DVP-PM Series
Category	Controller
Language	English