Delta DVS Series User Manual

DVS Series Managed Industrial Ethernet Switches User’s Manual
3-20
Description Factory Default
Admin Mode
Specify whether the DHCP relay is enabled on the interface:
 Enable: Enable the DHCP relay on the interface. If the DHCP relay
is globally disabled on the switch, you can still configure the
interface DHCP relay settings, but the settings do not take effect
even if you have applied it.
 Disable: Disable the DHCP relay on the interface.
Disable
82 Option Trust Mode
As a security consideration, specify whether the interface is trusted
when DHCP relay agent information (DHCP option 82) is received on
the interface:
 Enable: The relay agent information that is received on the interface
can be trusted.
 Disable: The relay agent information that is received on the
interface cannot be trusted and should be ignored.
Disable
 DHCP L2 Relay Statistics
You can see the statistics of DHCP L2 relay messages in this page
DHCP L2 Relay Interface Statistics
Description Factory Default
Interface
The interface number.
interface number
Untrusted Server Messages With Opt82
The amount of DHCP packets with option 82 that were received from
an untrusted server.
0
Untrusted Client Messages With Opt82
The amount of DHCP packets with option 82 that were received from
an untrusted client.
0
Trusted Server Messages Without Opt82
The amount of DHCP packets without option 82 that were received
from a trusted server.
0

Delta DVS Series Specifications

General

Brand	Delta
Model	DVS Series
Category	Switch
Language	English