Delta NT Series User Manual

Chapter 6 UPS Display and Settings
78
To leave the “Language Setting” page, press the “ ” and “ ” buttons simultaneously to
go back to the “Parameter Setting” menu.
To leave the “Parameter Setting” menu, press the “ ” a n d “ ” buttons simultaneously
to go back to the “
Main Menu
”.
6. In
“
Main Menu
”
, press the “ ” or “ ” to choose “System Control” and press
the “
” button to enter the “System Control” menu. Before enter the “System
Control” menu, you have to key in the password.
Use the “
” and “ ” buttons to choose
the functions.
Æ
Measure Page
Parameter Setting
System Control
Event Log
Other Information

z
If the password is wrong, you cannot
set up the parameter.

z
If the password is true, the LCD will en-
ter the “System Control” menu.
Please Key in
The PasswordǺ
1 2 3 4
Ç
Ǻɠ
ÈǺɡ
Inverter UPS Work
ON/ OFF Mode
Buzzer Force
ON/ OFF Bypass
Boost
Charge
UPS Output
ON/ OFF
Æ
6-1. Press the “ ” or “ ” button to choose “Inverter ON/ OFF” and press the “ ”
button to enter the “Inverter Output” setting page.

Delta NT Series Specifications

General

Brand	Delta
Model	NT Series
Category	UPS
Language	English