Delta UPS602N2004N035 - LCD Display

13
Chapter 3 Operation Panel
3.3 LCD Display
Hz
KW
KVA
AH
MIN
MIN
ECO
V
V
%
IN
SET IN OUT BATT
RUN TIME
°C
LOAD TEST
No. Icon Naming Description
1
AC
Icon
Indicates the input source status.
1. ON: The AC input is within the acceptable
bypass range.
2. Flashing: The AC input is out of the accep-
table bypass range but is able to let the unit
operate in on-line mode.
3. OFF: The AC input is out of the acceptable
bypass range and is not able to let the unit
operate in on-line mode.
2
Output
Icon
Indicates the output status.
1. ON: There is output.
2. OFF: There is no output.
3
Battery
Power
Icon
Indicates the battery power status.
1. ON: The UPS runs in battery mode or the
batteries are charging.
2. OFF: It is not the batteries to supply power to
the connected loads or the batteries are not
charging.
4
PFC
Icon
Indicates the PFC status.
1. ON: The PFC is running.
2. OFF: The PFC is not running.